BS EN 12385-1-2002
|
ID： |
4774A00755754E8C889D86C9A8F6519B |
|
文件大小(MB)： |
0.15 |
|
页数： |
22 |
|
文件格式： |
|
|
日期： |
2013-6-23 |
|
购买： |
文本摘录（文本识别可能有误，但文件阅览显示及打印正常，pdf文件可进行文字搜索定位）：
BRITISH STANDARD BS EN,12385-1:2002,Incorporating,Corrigendum No. 1,Steel wire ropes —,Safety —,Part 1: General requirements,The European Standard EN 12385-1:2002 has the status of a,British Standard,ICS 77.140.65, , ,,,,, , ,BS EN 12385-1:2002,This British Standard, having,been prepared under the,direction of the Engineering,Sector Policy and Strategy,Committee, was published,under the authority of the,Standards Policy and Strategy,Committee on 30 October 2002,. BSI 17 March 2004,ISBN 0 580 40661 X,National foreword,This British Standard is the official English language version of,EN 12385-1:2002. It supersedes BS 302-1:1987 which is withdrawn.,The UK participation in its preparation was entrusted to Technical Committee,MHE/2, Wire ropes, which has the responsibility to:,A list of organizations represented on this committee can be obtained on,request to its secretary.,Cross-references,The British Standards which implement international or European,publications referred to in this document may be found in the BSI Catalogue,under the section entitled “International Standards Correspondence Index”, or,by using the “Search” facility of the BSI Electronic Catalogue or of,British Standards Online.,This publication does not purport to include all the necessary provisions of a,contract. Users are responsible for its correct application.,Compliance with a British Standard does not of itself confer immunity,from legal obligations.,— aid enquirers to understand the text;,— present to the responsible international/European committee any,enquiries on the interpretation, or proposals for change, and keep the,UK interests informed;,— monitor related international and European developments and,promulgate them in the UK.,Summary of pages,This document comprises a front cover, an inside front cover, the EN title page,pages 2 to 18, an inside back cover and a back cover.,The BSI copyright notice displayed in this document indicates when the,document was last issued.,Amendments issued since publication,Amd. No. Date Comments,15085,Corrigendum No. 1,17 March 2004 Clause numbering corrected,EUROPEAN STANDARD,NORME EUROPéENNE,EUROP腎SCHE NORM,EN 12385-1,October 2002,ICS 77.140.65,English version,Steel wire ropes - Safety - Part 1: General requirements,Cables en acier - Sécurité - Partie 1: Prescriptions,générales,Drahtseile aus Stahldraht - Sicherheit - Teil 1: Allgemeine,Anforderungen,This European Standard was approved by CEN on 12 November 2001.,CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European,Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national,standards may be obtained on application to the Management Centre or to any CEN member.,This European Standard exists in three official versions (English, French, German). A version in any other language made by translation,under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official,versions.,CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.,EUROPEAN COMMITTEE FOR STANDARDIZATION,COMITé EUROPéEN DE NORMALISATION,EUROP腎SCHES KOMITEE FüR NORMUNG,Management Centre: rue de Stassart, 36 B-1050 Brussels,. 2002 CEN All rights of exploitation in any form and by any means reserved,worldwide for CEN national Members.,Ref. No. EN 12385-1:2002 E,EN 12385-1:2002 (E),2,Contents,page,Foreword3,Introduction .4,1 Scope .4,2 Normative references ..5,3 Terms and definitions..5,4 List of hazards..5,5 Safety requirements and/or measures ..6,6 Verification of safety requirements and/or measures..9,7 Information for use .12,Annex A (normative) Sampling and acceptance criteria for type testing of ropes produced in series13,Annex B (normative) Testing requirements for wires taken from the rope when specified in other Parts,of this standard .15,Bibliography .18,EN 12385-1:2002 (E),3,Foreword,This document (EN 12385-1:2002) has been prepared by Technical Committee CEN/TC 168, “Chains, ropes,webbing, slings and accessories – Safety”, the secretariat of which is held by BSI.,This European Standard shall be given the status of a national standard, either by publication of an identical text or,by endorsement, at the latest by April 2003, and conflicting national standards shall be withdrawn a……
……